New Damper Actuators IP66 & IP66/67. Endurance Test Fulfilled!

By Anonymous -


Reliable even under extreme conditions, Belimo damper and valve actuators with the IP66 resist cold, dust, moisture and aggressive gases. Available as rotary, fast running and emergency control actuators, they resist cold, dust, moisture and aggressive gases – not only for interior applications in severely contaminated areas but also for outside weather conditions.

Enormously robust
Dampers and valves are exposed to extreme conditions in many locations. Belimo damper actuators with enhanced degrees of protection can overcome such challenges. Neither contaminated ambient air nor running water – such as when the application is being cleaned – can have any effect on the compact and exceptionally resistant CM..G actuators. In addition, the IP66 unit for rotary, fast running and emergency control actuators also provides protection against UV light, cold, dust and moisture. The Robust-Line actuators IP66/67 are suitable for particularly exposed positions with aggressive gases and high levels of contamination.

Degrees of protection
In order to ensure that the actuators meet the specifications of the degrees of protection listed, they have been tested by Belimo under the toughest conditions. The CM..G.. compact actuators are equipped with a specially sealed housing, while the rotary, fast running and emergency control actuators are surrounded by the IP66 unit which was developed for that purpose. The RobustLine actuators for air dampers, characterised control valves and butterfly valves are equipped with an especially stable, waterproof housing. If desired, a heating element with thermostat can be installed ex works. This makes it possible to use the devices even under conditions of extreme temperatures down to –40°C. 

To know more please visit our website at: www.i-acs.co.uk/store/

Comments

Post a Comment

Popular posts from this blog

CAREL and the dreaded 'NO LINK' Screen!

By -
Image
CAREL and the dreaded 'NO LINK' Screen! Picture the scene, you've just downloaded a fresh new piece of software onto a controller but rather than the a new interface, you're met with a big fat 'NO LINK' message on the display. Or maybe you've just ran a factory reset to default settings and have come up against the same issue?  These are all possible causes for the common problem encountered by many of our customers, deemed the 'NO LINK' screen! (capitals for emphasis) As well as the two already mentioned, other common causes of the issue are a result of: A faulty connection between the Controller and the Display A faulty Controller  In any case, this issue is relatively simple to fix and our Managing Director, Stefano - having been in the Industry for 15+ years - has put together a video guide on how to do so. Watch the video below to see how to overcome the dreaded 'NO LINK' Screen!   www.i-acs.co.uk
Read more

The Future of HVAC Controls

By -
Image
For those who think that the new generation of innovative, automated HVAC control systems are a far-off thought, think again!  The new c.pCO Range by CAREL marks the arrival of their most intelligent range of controllers yet. Despite their compact design, the c.pCO Controllers are packed with new and exciting technologies offering a highly integrated solution to any kind of BMS System.  The versatile nature of the new standard controller (2 Ethernet, USB & RS485 Inputs Built In) opens doors to a wide range of communication protocols such as Modbus, BACNet,  HTTP, FTP  and loads more. The video below offers a detailed look into the new features and benefits of the c.pCO range. Worried about having to do a lot of work to replace older controllers? As if this wasn't enough, all c.pCO Controllers offer pin-to-pin compatibility with pCO5+, pCO5 and pCO3 controllers.  Get in touch now for more information! Peter Campbell Marketing
Read more

HVAC Residential Solutions

By Anonymous -
Image
With its residential air-conditioning solutions, Carel represents a reliable and innovative technological partner for manufacturers of heat pumps and all operators (manufacturers, installers, system integrators) who want to offer an integrated controller for indoor comfort at home and domestic hot water production systems, focusing on energy efficiency, respect for the environment and optimization of resources, as well as easy operation and complete user satisfaction. To achieve these results, Carel pays special care to technological innovation, usability and access to information. Technological innovation pCO sistema+ allows management of variable speed compressors with DC inverters that, when combined with electronic expansion valves , ensure the most extensive modulation of heating and cooling capacity currently available, maximizing residential air-conditioning system efficiency in response to different comfort requirements and different climatic conditions throughout
Read more