IR33, welcome to the new generation!

By Anonymous -
The famous ir32 series of controllers has given rise to the new generation of controllers for
refrigeration!
The new ir33 includes: infrared remote control, programming key, repeater display, high efficiency LED display, HACCP function, clock, RS485 serial port, defrost management on a second evaporator, all without sacrificing the 4 relay outputs and the 115 to 230 Vac switching power supply!
All this in the same dimension as the current ir32!
ir33 also manages smart defrosts, resulting in energy savings for the entire intallation.
IP65 is guaranteed: the innovative technology used by CAREL to mould the plastic parts allows the protection gasket to be integrated directly into the front panel.
In models with an internal clock, HACCP management is standard: this guarantees the temperature control of the foodstuffs stored, in compliance with the requirements of the HACCP system.
The parameters are set directly on the instrument: the time and temperature limits envisaged by the standard on food storage can be set.
The controller automatically manages the monitoring of the unit, highlighting any critical situations. It warns when the alarm limits are exceeded, saving the main information to permanent memory. Additionally, it signals power failures in the event where the maintenance of the temperature could be compromised.
The data are easy to read on the instrument, and the alarm conditions are signaled automatically.

Comments

Post a Comment

Popular posts from this blog

CAREL and the dreaded 'NO LINK' Screen!

By -
Image
CAREL and the dreaded 'NO LINK' Screen! Picture the scene, you've just downloaded a fresh new piece of software onto a controller but rather than the a new interface, you're met with a big fat 'NO LINK' message on the display. Or maybe you've just ran a factory reset to default settings and have come up against the same issue?  These are all possible causes for the common problem encountered by many of our customers, deemed the 'NO LINK' screen! (capitals for emphasis) As well as the two already mentioned, other common causes of the issue are a result of: A faulty connection between the Controller and the Display A faulty Controller  In any case, this issue is relatively simple to fix and our Managing Director, Stefano - having been in the Industry for 15+ years - has put together a video guide on how to do so. Watch the video below to see how to overcome the dreaded 'NO LINK' Screen!   www.i-acs.co.uk
Read more

The Future of HVAC Controls

By -
Image
For those who think that the new generation of innovative, automated HVAC control systems are a far-off thought, think again!  The new c.pCO Range by CAREL marks the arrival of their most intelligent range of controllers yet. Despite their compact design, the c.pCO Controllers are packed with new and exciting technologies offering a highly integrated solution to any kind of BMS System.  The versatile nature of the new standard controller (2 Ethernet, USB & RS485 Inputs Built In) opens doors to a wide range of communication protocols such as Modbus, BACNet,  HTTP, FTP  and loads more. The video below offers a detailed look into the new features and benefits of the c.pCO range. Worried about having to do a lot of work to replace older controllers? As if this wasn't enough, all c.pCO Controllers offer pin-to-pin compatibility with pCO5+, pCO5 and pCO3 controllers.  Get in touch now for more information! Peter Campbell Marketing
Read more

1tool

By Anonymous -
Image
1tool is the development system for the Carel programmable control platform, consisting of six different environments in which the designer manages the application software in all its different stages: from design to simulation, to testing and debugging, to arrive at commissioning in the field. A fundamental feature of 1tool is integration. Because all the different environments are interconnected to best support development of the application software. Each environment is in fact dedicated to the realisation of a specific function and interacts with the others to offer the designer: -  Greater reliability thanks to real-time error notifications in the design stage; - Reduced development time using the advanced functions offered, first and foremost the new libraries of functional modules specific for HVAC/R; -  Flexibility in terms of software customisation. All these features, an intuitive graphic interface and user simplicity make 1tool an excellent product, responding to th
Read more