humiFog multizone

By Anonymous -
The humiFog can be used in the following configurations:

for applications in AHUs, the pump operates at variable pressure with flow control, for precise and continuous modulation of humidification capacity.

for applications in AHUs and in rooms, in which a pumping unit (master) supplies multiple distribution systems (up to 6). Water pressure is kept constant (70 bars), capacity is modulated in steps.
The multizone configuration rationalizes the use of the humiFog pumping unit as, despite the lower precision due to stepped modulation (±5% against the ±2% guaranteed by the single zone solution), it can manage multiple zones at the same time, without having to install a pumping unit for each AHU or industrial environment.
Direct humidification into rooms: humiFog multizones is the ideal system, as by keeping water pressure high (70 bars), each nozzle generates a cone of very fine droplets (average diameter 10 to 15 µm) that evaporate completely in a short time and space. The air temperature and humidity conditions, together with the presence of objects, may represent limits that must be considered in the installation to prevent the droplets from wetting objects,  machinery and people in the room. When these limits are not satisfied, blowers can be used that, due to the cushion of air generated by the built-in tangential fan, carry the droplets of water in a substantially horizontal trajectory.

Comments

Post a Comment

Popular posts from this blog

CAREL and the dreaded 'NO LINK' Screen!

By -
Image
CAREL and the dreaded 'NO LINK' Screen! Picture the scene, you've just downloaded a fresh new piece of software onto a controller but rather than the a new interface, you're met with a big fat 'NO LINK' message on the display. Or maybe you've just ran a factory reset to default settings and have come up against the same issue?  These are all possible causes for the common problem encountered by many of our customers, deemed the 'NO LINK' screen! (capitals for emphasis) As well as the two already mentioned, other common causes of the issue are a result of: A faulty connection between the Controller and the Display A faulty Controller  In any case, this issue is relatively simple to fix and our Managing Director, Stefano - having been in the Industry for 15+ years - has put together a video guide on how to do so. Watch the video below to see how to overcome the dreaded 'NO LINK' Screen!   www.i-acs.co.uk
Read more

HVAC Residential Solutions

By Anonymous -
Image
With its residential air-conditioning solutions, Carel represents a reliable and innovative technological partner for manufacturers of heat pumps and all operators (manufacturers, installers, system integrators) who want to offer an integrated controller for indoor comfort at home and domestic hot water production systems, focusing on energy efficiency, respect for the environment and optimization of resources, as well as easy operation and complete user satisfaction. To achieve these results, Carel pays special care to technological innovation, usability and access to information. Technological innovation pCO sistema+ allows management of variable speed compressors with DC inverters that, when combined with electronic expansion valves , ensure the most extensive modulation of heating and cooling capacity currently available, maximizing residential air-conditioning system efficiency in response to different comfort requirements and different climatic conditions throughout...
Read more

Cold Rooms for food storage

By Anonymous -
Image
Food storage uses various procedures that vary based on duration: Refrigeration, if the food must be stored for a short period of time (0…7 ° C). Freezing, deep freezing and lyophilisation (freeze drying) if it must be stored for long periods. When deep freezing the product it must reach a temperature of -18 ° C in less than 4 hours while for regular freezing the product can take more than 4 hours to reach -18 ° C. During lyophilisation the product is dried following a forced evaporation of the water component of the product. In the food industry, refrigeration is one of the most delicate and complex applications because food requires treatment at different temperatures depending upon the processing phase. Refrigeration slows the growth of bacteria on food. The technique is based on the extremely quick and intense action performed by the cold temperature that allows the organoleptic qualities of the food to be kept intact, prolonging storage time. Systems...
Read more