High pressure ambient humidification in HSBC

By Anonymous -


Headquartered in London, with over 9.500 offices in 79 countries HSBC is one of the largest banking and financial services organisations in the world.
CAREL was asked to provide comfortable ambient air quality in the offices and customer areas of the HSBC in Dusseldorf (Germany).
During winter time, the outdoor air is very dry and cold. Increasing internal temperature with a heating system decreases its relative humidity leading the air condition at a very low comfort level.
Low air humidity levels cause dryness of the throat, nose and eyes, increasing the probability of falling ill and consequently having to take time off from work. Low humidity levels moreover, accentuate problems deriving from electromagnetic fields and static electricity that, as well as possibly damaging and interfering with electronic devices, are harmful to the health.
A humiFog humidifier has been installed in the Air Handling Unit . Up to 246 kg/h of water can be sprayed by the humifog using only 1,050 watt, that means only 4.26 W/kg. The sprayed water is supplied by a reverse osmosis treatment system so that the maintenance of the humidifier is strongly reduced. The humiFog pumping station is equipped with a Variable Frequency Driver and a multi stage atomising technology obtaining a wide modulation range: the BMS can require humiFog any flow rate in the range 47 to 246 kg/h. 

Precise ambient climate control is obtainable using humiFog humidifier to have a very comfortable air condition.

Comments

Post a Comment

Popular posts from this blog

CAREL and the dreaded 'NO LINK' Screen!

By -
Image
CAREL and the dreaded 'NO LINK' Screen! Picture the scene, you've just downloaded a fresh new piece of software onto a controller but rather than the a new interface, you're met with a big fat 'NO LINK' message on the display. Or maybe you've just ran a factory reset to default settings and have come up against the same issue?  These are all possible causes for the common problem encountered by many of our customers, deemed the 'NO LINK' screen! (capitals for emphasis) As well as the two already mentioned, other common causes of the issue are a result of: A faulty connection between the Controller and the Display A faulty Controller  In any case, this issue is relatively simple to fix and our Managing Director, Stefano - having been in the Industry for 15+ years - has put together a video guide on how to do so. Watch the video below to see how to overcome the dreaded 'NO LINK' Screen!   www.i-acs.co.uk
Read more

The Future of HVAC Controls

By -
Image
For those who think that the new generation of innovative, automated HVAC control systems are a far-off thought, think again!  The new c.pCO Range by CAREL marks the arrival of their most intelligent range of controllers yet. Despite their compact design, the c.pCO Controllers are packed with new and exciting technologies offering a highly integrated solution to any kind of BMS System.  The versatile nature of the new standard controller (2 Ethernet, USB & RS485 Inputs Built In) opens doors to a wide range of communication protocols such as Modbus, BACNet,  HTTP, FTP  and loads more. The video below offers a detailed look into the new features and benefits of the c.pCO range. Worried about having to do a lot of work to replace older controllers? As if this wasn't enough, all c.pCO Controllers offer pin-to-pin compatibility with pCO5+, pCO5 and pCO3 controllers.  Get in touch now for more information! Peter Campbell Marketing
Read more

Remote management and communication solutions

By Anonymous -
Image
Systems of monitoring and supervision carry out a role key in the management incorporated of the systems HVAC/R. These are essential instruments for continuously and effectively controlling the status of field devices and recording temperature and events in compliance with HACCP regulations. They can perform scheduled actions (e.g. lights on/off, etc.) and optimise the organisation of maintenance operations through effective alarm management. The immediate signalling of alarms by SMS, e-mail and/or fax means the installation is always under control, while the remote system can be used to resolve several problems quickly, without need to go on-site, ensuring economic savings and faster response times. The system offers various reporting options, including standards-compliant print-outs at programmable times. In addition, critical situations can be highlighted relating to the trend in values such as temperature, pressure and power consumption, comparing values
Read more