Lo-Carbon Tempra now on i-A.C.Systems!

By Anonymous -
Designed specifically to offer affordable easy to install heat recovery to the residential refurbishment market, the Lo-Carbon Tempra was the UK’s first single room heat recovery unit that can be retrofitted through a 100mm diameter hole in the wall. This allows inefficient extract fans to be easily replaced with a discreet, low energy, continuously running alternative that offers up to 84% heat recovery.
Single room heat recovery makes heat recovery more accessible and affordable for existing homes and so offers huge potential carbon reductions for both private and social housing.”
The innovative design of the unit enables standard bathroom, kitchen, toilet or utility room fans to be easily changed for a Tempra without the need to make the hole any larger, saving substantially on installation time and cost. Now available with two different spigot sizes the Tempra can be fitted through wall depths of up to 320mm, or up to 460mm.
Central to the Tempra’s compact footprint required to fit in a 100mm diameter hole is its double wheel motorised impellers. The innovative technology allows for just one motor to be used with an extended shaft to drive two impellers to achieve double flow requirements, resulting in a very energy efficient solution. The unit’s performance, taken together with Tempra’s integral Lo-Carbon™ DC motor, brings significant energy savings and will help reduce a home’s carbon footprint.Discreet and quiet in operation, Tempra can be set to run continuously at 6 l/s or 9 l/s, boosting up to 13 l/s if required. For intermittent extract applications, the unit can be set to operate at 15 l/s. It also incorporates a manual summer setting to ensure that when it is warm outside, it operates on extract only. This eliminates the risk of the home overheating in hot summer weather.

Comments

Post a Comment

Popular posts from this blog

CAREL and the dreaded 'NO LINK' Screen!

By -
Image
CAREL and the dreaded 'NO LINK' Screen! Picture the scene, you've just downloaded a fresh new piece of software onto a controller but rather than the a new interface, you're met with a big fat 'NO LINK' message on the display. Or maybe you've just ran a factory reset to default settings and have come up against the same issue?  These are all possible causes for the common problem encountered by many of our customers, deemed the 'NO LINK' screen! (capitals for emphasis) As well as the two already mentioned, other common causes of the issue are a result of: A faulty connection between the Controller and the Display A faulty Controller  In any case, this issue is relatively simple to fix and our Managing Director, Stefano - having been in the Industry for 15+ years - has put together a video guide on how to do so. Watch the video below to see how to overcome the dreaded 'NO LINK' Screen!   www.i-acs.co.uk
Read more

HVAC Residential Solutions

By Anonymous -
Image
With its residential air-conditioning solutions, Carel represents a reliable and innovative technological partner for manufacturers of heat pumps and all operators (manufacturers, installers, system integrators) who want to offer an integrated controller for indoor comfort at home and domestic hot water production systems, focusing on energy efficiency, respect for the environment and optimization of resources, as well as easy operation and complete user satisfaction. To achieve these results, Carel pays special care to technological innovation, usability and access to information. Technological innovation pCO sistema+ allows management of variable speed compressors with DC inverters that, when combined with electronic expansion valves , ensure the most extensive modulation of heating and cooling capacity currently available, maximizing residential air-conditioning system efficiency in response to different comfort requirements and different climatic conditions throughout...
Read more

Cold Rooms for food storage

By Anonymous -
Image
Food storage uses various procedures that vary based on duration: Refrigeration, if the food must be stored for a short period of time (0…7 ° C). Freezing, deep freezing and lyophilisation (freeze drying) if it must be stored for long periods. When deep freezing the product it must reach a temperature of -18 ° C in less than 4 hours while for regular freezing the product can take more than 4 hours to reach -18 ° C. During lyophilisation the product is dried following a forced evaporation of the water component of the product. In the food industry, refrigeration is one of the most delicate and complex applications because food requires treatment at different temperatures depending upon the processing phase. Refrigeration slows the growth of bacteria on food. The technique is based on the extremely quick and intense action performed by the cold temperature that allows the organoleptic qualities of the food to be kept intact, prolonging storage time. Systems...
Read more