New generation of Belimo Characterized Control Valve (CCV)

By Anonymous -
With Characterized Control Valves (CCV) Belimo created the first ball valve for precise HVAC control. CCV is fitted with a special disc inside the inlet port that modulates flow so that system stability is easier to achieve. Proven millions of times over and now optimised even more – effective immediately, the unique Belimo ball valves (open-close, change-over and characterised control valves) open up additional application possibilities and minimise the causes of errors during installation.

Proven State-of-the-art valve technology
As 2-way and 3-way types with internal thread or flanges, as well as with a stainless ball, the Belimo ball valves are now suitable for temperatures from –10°C (without spindle heating) to 120°C. This means they are extending their radius of action as spacesaving, inexpensive valves to include additional applications. In addition, they have been given a revised actuator connection (formclosure connection with a pin in the tappet shaft): This practically eliminates errors at the time of the actuator installation. The characterised control valves of the new generation continue to be equipped with the Belimo-patented characterising disk with many years of proven use behind it. It guarantees them an equal percentage valve characteristic curve and closes them air bubble tight.

Comprehensive motorisation philosophy
The ball valves are motorised to suit the respective application. Belimo actuators of the new generation are utilised in order to ensure that you can operate your water solutions with a comprehensive motorisation philosophy – in the performance classes from 2 to 20 Nm. Actuators with emergency control functions are also available for the purpose of system protection.

Comments

Post a Comment

Popular posts from this blog

CAREL and the dreaded 'NO LINK' Screen!

By -
Image
CAREL and the dreaded 'NO LINK' Screen! Picture the scene, you've just downloaded a fresh new piece of software onto a controller but rather than the a new interface, you're met with a big fat 'NO LINK' message on the display. Or maybe you've just ran a factory reset to default settings and have come up against the same issue?  These are all possible causes for the common problem encountered by many of our customers, deemed the 'NO LINK' screen! (capitals for emphasis) As well as the two already mentioned, other common causes of the issue are a result of: A faulty connection between the Controller and the Display A faulty Controller  In any case, this issue is relatively simple to fix and our Managing Director, Stefano - having been in the Industry for 15+ years - has put together a video guide on how to do so. Watch the video below to see how to overcome the dreaded 'NO LINK' Screen!   www.i-acs.co.uk
Read more

The Future of HVAC Controls

By -
Image
For those who think that the new generation of innovative, automated HVAC control systems are a far-off thought, think again!  The new c.pCO Range by CAREL marks the arrival of their most intelligent range of controllers yet. Despite their compact design, the c.pCO Controllers are packed with new and exciting technologies offering a highly integrated solution to any kind of BMS System.  The versatile nature of the new standard controller (2 Ethernet, USB & RS485 Inputs Built In) opens doors to a wide range of communication protocols such as Modbus, BACNet,  HTTP, FTP  and loads more. The video below offers a detailed look into the new features and benefits of the c.pCO range. Worried about having to do a lot of work to replace older controllers? As if this wasn't enough, all c.pCO Controllers offer pin-to-pin compatibility with pCO5+, pCO5 and pCO3 controllers.  Get in touch now for more information! Peter Campbell Marketing
Read more

1tool

By Anonymous -
Image
1tool is the development system for the Carel programmable control platform, consisting of six different environments in which the designer manages the application software in all its different stages: from design to simulation, to testing and debugging, to arrive at commissioning in the field. A fundamental feature of 1tool is integration. Because all the different environments are interconnected to best support development of the application software. Each environment is in fact dedicated to the realisation of a specific function and interacts with the others to offer the designer: -  Greater reliability thanks to real-time error notifications in the design stage; - Reduced development time using the advanced functions offered, first and foremost the new libraries of functional modules specific for HVAC/R; -  Flexibility in terms of software customisation. All these features, an intuitive graphic interface and user simplicity make 1tool an excellent product, responding to th
Read more