The New 2 Way Characterised Control Valves

By Anonymous -
Belimo is now offering a convincing alternative to the heavyweight Globe valve actuator combinations: The extremely compact characterised control valves (CCV) with nominal diameters of DN 65...150 are up to three times lighter and lead to a reduction in operating costs.


  
More compact, lighter, better
The product range of the globally unique Belimo characterised control valves is being expanded further: New flange versions in nominal diameters of DN 65 up toDN 150 control even larger sized volumetric flows with the highest of precision. Their patented characterising disk ensures an equal-percentage valve characteristic curve. Thanks to the simplicity of their construction, the characterised control valves are pressure-compensated and therefore require no holding torque when in closed position. Furthermore, because they close air bubble tight, an energy saving of up to 40% can be achieved during operation.

Economical alternative
The new characterised control valves can be utilised with medium temperatures ranging from + 5°C to + 120°C, are up to three times lighter and require when motorised at least 50% less installation height as PN16 globe valves of the same nominal diameters.
This makes a positive impression, and not only with respect to installation costs: smaller, more inexpensive devices can be utilised in place of the large and costly actuators. As a rule, the payoff sets in just 1 ½ years.

Comments

Post a Comment

Popular posts from this blog

CAREL and the dreaded 'NO LINK' Screen!

By -
Image
CAREL and the dreaded 'NO LINK' Screen! Picture the scene, you've just downloaded a fresh new piece of software onto a controller but rather than the a new interface, you're met with a big fat 'NO LINK' message on the display. Or maybe you've just ran a factory reset to default settings and have come up against the same issue?  These are all possible causes for the common problem encountered by many of our customers, deemed the 'NO LINK' screen! (capitals for emphasis) As well as the two already mentioned, other common causes of the issue are a result of: A faulty connection between the Controller and the Display A faulty Controller  In any case, this issue is relatively simple to fix and our Managing Director, Stefano - having been in the Industry for 15+ years - has put together a video guide on how to do so. Watch the video below to see how to overcome the dreaded 'NO LINK' Screen!   www.i-acs.co.uk
Read more

The Future of HVAC Controls

By -
Image
For those who think that the new generation of innovative, automated HVAC control systems are a far-off thought, think again!  The new c.pCO Range by CAREL marks the arrival of their most intelligent range of controllers yet. Despite their compact design, the c.pCO Controllers are packed with new and exciting technologies offering a highly integrated solution to any kind of BMS System.  The versatile nature of the new standard controller (2 Ethernet, USB & RS485 Inputs Built In) opens doors to a wide range of communication protocols such as Modbus, BACNet,  HTTP, FTP  and loads more. The video below offers a detailed look into the new features and benefits of the c.pCO range. Worried about having to do a lot of work to replace older controllers? As if this wasn't enough, all c.pCO Controllers offer pin-to-pin compatibility with pCO5+, pCO5 and pCO3 controllers.  Get in touch now for more information! Peter Campbell Marketing
Read more

Remote management and communication solutions

By Anonymous -
Image
Systems of monitoring and supervision carry out a role key in the management incorporated of the systems HVAC/R. These are essential instruments for continuously and effectively controlling the status of field devices and recording temperature and events in compliance with HACCP regulations. They can perform scheduled actions (e.g. lights on/off, etc.) and optimise the organisation of maintenance operations through effective alarm management. The immediate signalling of alarms by SMS, e-mail and/or fax means the installation is always under control, while the remote system can be used to resolve several problems quickly, without need to go on-site, ensuring economic savings and faster response times. The system offers various reporting options, including standards-compliant print-outs at programmable times. In addition, critical situations can be highlighted relating to the trend in values such as temperature, pressure and power consumption, comparing values
Read more