Sensors and protection devices

By Anonymous -
Carel's response to the needs of HVAC installers and manufacturers was the design of an entire range of increasingly advanced probes. 
The range envisions temperature and humidity sensors with different uses, housed in sockets, ducted, residential or industrial environment, pressure transducers, smoke, fire and flood detectors, air quality probes, gas leak detectors for refrigerant units, guaranteeing performance and compatibility with all Carel controllers.

Advantages
Carel probes, as well as being characterized by the acknowledged performance that sets them apart, are very versatile and can satisfy various market requirements.
In fact, all the probes have been especially designed to be compatible not only with all Carel controllers, but also with the most commonly used standards worldwide.
The temperature and humidity probes, offering a great choice between active and passive technology, are available in different operating ranges and also in specific versions for corrosive or polluting environments.
The pressure transducers are available in a ratiometric version, 0 to 5 V and 4 to 20 mA, also in a sealed version offering improved performance in terms of precision.
The air quality sensors offer a new and important accessory to installers and manufacturers of AHUs, absolutely in line with Carel quality.
The  smoke/fire and flood detectors are small devices with auto-calibration function, thus adapting to different environmental conditions without losing activation accuracy.
For the detection of CFC's HFC's and CO2 gas refrigerants, Carel offers a range of sensors designed to satisfy requirements in the industrial refrigeration and air-conditioning for supermarkets, shopping centres, and other public places.

Comments

Post a Comment

Popular posts from this blog

CAREL and the dreaded 'NO LINK' Screen!

By -
Image
CAREL and the dreaded 'NO LINK' Screen! Picture the scene, you've just downloaded a fresh new piece of software onto a controller but rather than the a new interface, you're met with a big fat 'NO LINK' message on the display. Or maybe you've just ran a factory reset to default settings and have come up against the same issue?  These are all possible causes for the common problem encountered by many of our customers, deemed the 'NO LINK' screen! (capitals for emphasis) As well as the two already mentioned, other common causes of the issue are a result of: A faulty connection between the Controller and the Display A faulty Controller  In any case, this issue is relatively simple to fix and our Managing Director, Stefano - having been in the Industry for 15+ years - has put together a video guide on how to do so. Watch the video below to see how to overcome the dreaded 'NO LINK' Screen!   www.i-acs.co.uk
Read more

HVAC Residential Solutions

By Anonymous -
Image
With its residential air-conditioning solutions, Carel represents a reliable and innovative technological partner for manufacturers of heat pumps and all operators (manufacturers, installers, system integrators) who want to offer an integrated controller for indoor comfort at home and domestic hot water production systems, focusing on energy efficiency, respect for the environment and optimization of resources, as well as easy operation and complete user satisfaction. To achieve these results, Carel pays special care to technological innovation, usability and access to information. Technological innovation pCO sistema+ allows management of variable speed compressors with DC inverters that, when combined with electronic expansion valves , ensure the most extensive modulation of heating and cooling capacity currently available, maximizing residential air-conditioning system efficiency in response to different comfort requirements and different climatic conditions throughout
Read more

Cold Rooms for food storage

By Anonymous -
Image
Food storage uses various procedures that vary based on duration: Refrigeration, if the food must be stored for a short period of time (0…7 ° C). Freezing, deep freezing and lyophilisation (freeze drying) if it must be stored for long periods. When deep freezing the product it must reach a temperature of -18 ° C in less than 4 hours while for regular freezing the product can take more than 4 hours to reach -18 ° C. During lyophilisation the product is dried following a forced evaporation of the water component of the product. In the food industry, refrigeration is one of the most delicate and complex applications because food requires treatment at different temperatures depending upon the processing phase. Refrigeration slows the growth of bacteria on food. The technique is based on the extremely quick and intense action performed by the cold temperature that allows the organoleptic qualities of the food to be kept intact, prolonging storage time. Systems
Read more